tftpboot/preseed/debian/jessie/preseed_cinnamon.cfg

381 lines
18 KiB
INI

####################################################################
# Howto use
####################################################################
## With a PXE boot:
#label jessie
# menu label Debian GNU/Linux ^Jessie 64 bits WITH PRESEED
# kernel installer/debian/jessie/amd64/linux
# APPEND vga=normal initrd=installer/debian/jessie/amd64/initrd_firm.gz auto=true interface=auto netcfg/dhcp_timeout=60 netcfg/choose_interface=auto priority=critical preseed/url=tftp://129.20.27.239/installer/debian/jessie/amd64/preseed.cfg IPAPPEND 2
####################################################################
# Localization
####################################################################
#### Install Time
# Preseeding only locale sets language, country and locale.
#d-i debian-installer/locale string en_US
# The values can also be preseeded individually for greater flexibility.
d-i debian-installer/language string en
d-i debian-installer/country string FR
d-i debian-installer/locale select en_US.UTF-8
d-i debian-installer/fallbacklocale select en_US.UTF-8
d-i debian-installer/keymap string fr-latin9
## Choose language
d-i localechooser/languagelist select en
## Choose keyboard configuration
d-i console-tools/archs string skip-config
d-i console-keymaps-at/keymap select fr-latin9
d-i keyboard-configuration/xkb-keymap select French
#####################################################################
## Network configuration
#####################################################################
# To set a different link detection timeout (default is 3 seconds).
# Values are interpreted as seconds.
d-i netcfg/link_detection_timeout string 20
# If you have a slow dhcp server and the installer times out waiting for
# it, this might be useful.
d-i netcfg/dhcp_timeout string 60
d-i netcfg/dhcpv6_timeout string 60
## Network Configuration
d-i netcfg/get_hostname string myhostname
d-i netcfg/get_domain string mydomain.fr
# If non-free firmware is needed for the network or other hardware, you can
# configure the installer to always try to load it, without prompting. Or
# change to false to disable asking.
d-i hw-detect/load_firmware boolean true
#####################################################################
## Remote install (Manual)
#####################################################################
# Use the following settings if you wish to make use of the network-console
# component for remote installation over SSH. This only makes sense if you
# intend to perform the remainder of the installation manually.
#d-i anna/choose_modules string network-console
#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
#d-i network-console/password password r00tme
#d-i network-console/password-again password r00tme
#####################################################################
## Mirror settings
#####################################################################
## Mirror
d-i mirror/country string FR
d-i mirror/http/hostname string ftp.fr.debian.org
d-i mirror/http/directory string /debian
d-i mirror/http/proxy string
d-i mirror/http/mirror string ftp.fr.debian.org
d-i mirror/suite string
#####################################################################
## Account
#####################################################################
# Allow login as root?
user-setup-udeb passwd/root-login boolean true
# Root password in clear text
#d-i passwd/root-password password r00tme
#d-i passwd/root-password-again password r00tme
# ... or encrypted with MD5 hash
d-i passwd/root-password-crypted password $6$ceGTxMxc$gXajYByJna1cfTjaST3TcF0FfrlSAaEcmCiOMq/DBOuD0tlu8VYQosZPgwcFT4bCuODMErU/fgRxZEeu9c10V0
# Create a normal user account now?
d-i passwd/make-user boolean false
# User name
#d-i passwd/user-fullname string bob
#d-i passwd/username string bob
## User password in clear text
#d-i passwd/user-password password insecure
#d-i passwd/user-password-again password insecure
## ... or encrypted with MD5 hash
##d-i passwd/user-password-crypted password $1$098f6bcd4621d373cade4e832627b4f6
## Set User UID
#d-i passwd/user-uid string 1000
#####################################################################
## Clock and time zone setup
#####################################################################
### Timezone
# Material clock on UTC
d-i clock-setup/utc boolean true
d-i time/zone string Europe/Paris
## Use NTP to set time
d-i clock-setup/ntp boolean true
d-i clock-setup/ntp-server string ntp.univ-rennes1.fr
#d-i clock-setup/ntp-server string 0.debian.pool.ntp.org
#####################################################################
## Disk Partitioning/Boot loader
#####################################################################
# If the system has only one disk the installer will default to using it.
# Otherwise, the device name must be given
d-i partman-auto/disk string /dev/sda /dev/vda
d-i partman-auto/init_automatically_partition select custom
# Specify the method to use
# - regular: use the usual partition types for the architecture
# - lvm: use LVM to partition the disk
# - crypto: use LVM within an encrypted partition
#d-i partman-auto/method string regular
d-i partman-auto/method string lvm
# It's ok to have /boot in the LVM
d-i partman-auto-lvm/no_boot boolean false
# Remove old LVM configuration
d-i partman-lvm/device_remove_lvm boolean true
d-i partman-lvm/device_remove_lvm_span boolean true
d-i partman-auto/purge_lvm_from_device boolean true
# Remove old RAID configuration
#d-i partman-md/device_remove_md boolean true
# Confirm to write the LVM partitions
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true
# Choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# - home: separate /home partition
# - multi: separate /home, /use, /var and /tmp partitions
#partman-auto partman-auto/choose_recipe select multi
# Or provide own recipe
# Regular partition
# limit:: <min size> <priority> <max size> ## In MB !
#d-i partman-auto/expert_recipe string \
#boot-root :: \
#40 50 100 ext3 \
#$primary{ } $bootable{ } \
#method{ format } format{ } \
#use_filesystem{ } filesystem{ ext3 } \
#mountpoint{ /boot } \
#. \
#500 10000 10000 ext4 \
#method{ format } format{ } \
#use_filesystem{ } filesystem{ ext4 } \
#label{ root } \
#mountpoint{ / } \
#. \
#64 512 300% linux-swap \
#method{ swap } format{ } \
#.
# LVM partition
# The device for physical volume must be listed in partman-auto/disk
# This recipe need almost 30Gb free space it's add all <min size>
# sda2 (16Gb), lv_* (~14Gb) then it should not count it because
# all logical volume are on sda2 ...
d-i partman-auto/expert_recipe string \
boot-root :: \
200 200000 250 ext3 \
$primary{ } $bootable{ } \
method{ format } format{ } \
use_filesystem{ } filesystem{ ext3 } \
label{ boot } \
mountpoint{ /boot } \
. \
16000 100000 10000000000000000 ext4 \
$defaultignore{ } \
$primary{ } \
method{ lvm } \
vg_name{ sys } \
. \
1000 8000 4000 ext4 \
$lvmok{ } \
in_vg{ sys } lv_name{ lv_root } \
method{ format } format{ } \
use_filesystem{ } filesystem{ ext4 } \
label{ root } \
mountpoint{ / } \
. \
4000 7000 10000 ext4 \
$lvmok{ } \
in_vg{ sys } lv_name{ lv_usr } \
method{ format } format{ } \
use_filesystem{ } filesystem{ ext4 } \
options/nodev{ nodev } \
label{ usr } \
mountpoint{ /usr } \
. \
4000 6000 10000 ext4 \
$lvmok{ } \
in_vg{ sys } lv_name{ lv_var } \
method{ format } format{ } \
use_filesystem{ } filesystem{ ext4 } \
options/nodev{ nodev } \
label{ var } \
mountpoint{ /var } \
. \
1000 5000 2000 ext4 \
$lvmok{ } \
in_vg{ sys } lv_name{ lv_tmp } \
method{ format } format{ } \
use_filesystem{ } filesystem{ ext4 } \
options/nodev{ nodev } \
options/nosuid{ nosuid } \
label{ tmp } \
mountpoint{ /tmp } \
. \
2000 4000 10000 ext4 \
$lvmok{ } \
in_vg{ sys } lv_name{ lv_home } \
method{ format } format{ } \
use_filesystem{ } filesystem{ ext4 } \
options/nodev{ nodev } \
label{ home } \
mountpoint{ /home } \
. \
512 3000 2000 ext4 \
$lvmok{ } \
in_vg{ sys } lv_name{ lv_opt } \
method{ format } format{ } \
use_filesystem{ } filesystem{ ext4 } \
label{ opt } \
mountpoint{ /opt } \
. \
512 1000 100% linux-swap \
$lvmok{ } \
in_vg{ sys } lv_name{ lv_swap } \
method{ swap } format{ } \
. \
100 100 100000000000 ext4 \
$lvmok{ } \
in_vg{ sys } lv_name{ lv_free } \
method{ format } format{ } \
use_filesystem{ } filesystem{ ext4 } \
label{ free } \
mountpoint{ /mnt/free } \
.
## Need to put all free space in a temp logical volume/partition
# Otherwise it's the last partition which get all free space
# Automatically partition without confirmation
d-i partman/confirm_write_new_label boolean true
#d-i partman/choose_partition select Finish partitioning and write changes to disk
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true
#####################################################################
## APT configuration // Package selection
#####################################################################
## Post install APT setup
d-i apt-setup/uri_type select d-i
d-i apt-setup/hostname string ftp.fr.debian.org
d-i apt-setup/directory string /debian/
d-i apt-setup/another boolean false
d-i apt-setup/security-updates boolean false
d-i apt-setup/non-free boolean true
d-i apt-setup/contrib boolean true
# Additional repositories, local[0-9] available
d-i apt-setup/local0/repository string \
http://apt.puppetlabs.com jessie main dependencies
#d-i apt-setup/local0/comment string local server
# Enable deb-src lines
d-i apt-setup/local0/source boolean true
# URL to the public key of the local repository; you must provide a key or
# apt will complain about the unauthenticated repository and so the
# sources.list line will be left commented out
#d-i apt-setup/local0/key string http://local.server/key
d-i apt-setup/local0/key string http://apt.puppetlabs.com/pubkey.gpg
# By default the installer requires that repositories be authenticated
# using a known gpg key. This setting can be used to disable that
# authentication. Warning: Insecure, not recommended.
#d-i debian-installer/allow_unauthenticated string true
## Choose packages
tasksel tasksel/first multiselect ssh-server standard cinnamon-desktop
## Individual additional packages to install
# tftp-hpa to download an archive (see preseed/late_command at the end of this file)
d-i pkgsel/include string tmux puppet zsh tftp-hpa
# Whether to upgrade packages after debootstrap.
# Allowed values: none, safe-upgrade, full-upgrade
d-i pkgsel/upgrade select full-upgrade
# Participate to Popularity Contest (disable for an unconnected server)
d-i popularity-contest/participate boolean true
#####################################################################
## Boot loader
#####################################################################
# Grub is the default boot loader (for x86). If you want lilo installed
# instead, uncomment this:
#d-i grub-installer/skip boolean true
# To also skip installing lilo, and install no bootloader, uncomment this
# too:
#d-i lilo-installer/skip boolean true
# This is fairly safe to set, it makes grub install automatically to the MBR
# if no other operating system is detected on the machine.
d-i grub-installer/only_debian boolean true
# This one makes grub-installer install to the MBR if it also finds some other
# OS, which is less safe as it might not be able to boot that other OS.
d-i grub-installer/with_other_os boolean true
# Since Debian Jessie, the d-i will ask to specify the device for Grub.
# Should use 'default', to use the default system disk
# Fix: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=759737
d-i grub-installer/bootdev string default
#####################################################################
## Finishing up the installation
#####################################################################
# Avoid that last message about the install being complete.
d-i finish-install/reboot_in_progress note
d-i prebaseconfig/reboot_in_progress note
# This will prevent the installer from ejecting the CD during the reboot,
# which is useful in some situations.
d-i cdrom-detect/eject boolean false
# This is how to make the installer shutdown when finished, but not
# reboot into the installed system.
#d-i debian-installer/exit/halt boolean true
# This will power off the machine instead of just halting it.
#d-i debian-installer/exit/poweroff boolean true
#in-target wget -O /tmp/finish.tar.gz "https://wiki.101010.fr/lib/exe/fetch.php?media=documentation:administration_systeme:finish.tar.gz" --no-check-certificate ; \
d-i preseed/late_command string in-target chsh -s /bin/zsh ; \
in-target /bin/sed -i 's/without-password/yes/g' /etc/ssh/sshd_config ; \
in-target /usr/bin/tftp 129.20.27.239 -c get installer/debian/finish.tar.gz /tmp/finish.tar.gz ; \
in-target tar xzf /tmp/finish.tar.gz -C /tmp/ ; \
in-target /bin/sh /tmp/finish/post.sh